all categories
phone icon

Available 24/7:
216-292-5585

Metric Safety Engineered Hoist Rings

Material: AISI 4140 Aircraft Quality

Finish: Black Oxide Per Mil Spec. Cadmium Plated Available

Safety Factor: 5:1

Category : Hoist Rings

CALL216-292-5585 OR EMAIL FOR THE MOST CURRENT PRICING

  • Description
  • Technical Specification

METRIC SAFETY ENGINEERED HOIST RINGS

Each Actek Metric Hoist Ring is 200% Proof-load Tested and individually serial numbered for better traceability.

Each hoist ring is individually packaged, shipped with a certificate of conformance, safety precaution, and additional safety information.

Swivel Hoist Rings are designed for lifting at any angle because they can swivel 360 degrees and pivot 180 degrees. Therefore, the rated load remains the same, regardless of the angle of force.

As a result, you increase safety and peace of mind.

Hoist rings are available with a rated load ranging from 800 lbs. to 250,000 lbs. with a 5:1 design safety factor.

  • • Despite the 5:1 safety factor, NEVER EXCEED THE RATED LOAD CAPACITY. This safety margin is needed in case of misuse, which could drastically lower load capacity.
  • • Tighten mounting screws to torque recommended. Periodically check torque because screws could loosen in extended service.
  • • Tensile strength of parent material should be above 80,000 PSI to achieve full load rating. For weaker material, consider through-hole mounting with a nut and washer on the other side.
  • • DO NOT APPLY SHOCK LOADS. Always lift gradually.
  •   Repeat magnaflux testing if shock loading ever occurs.
Item # Rated Load Thread Sz E B Torque
46912 400 kg M8 x 1.25 13 mm 32 mm 9 Nm
46913 400 kg M8 x 1.25 18 mm 32 mm 9 Nm
46916 500 kg M10 x 1.75 18 mm 30 mm 16 Nm
49301 625 kg M12 x 1.75 23 mm 28 mm 37 Nm
46608 1050 kg M12 x 1.75 27 mm 48 mm 37 Nm
46924 1050 kg M12 x 1.75 19 mm 60 mm 37 Nm
47124 1050 kg M12 x 1.75 19 mm 110 mm 37 Nm
46928 1050 kg M14 x 2.00 29 mm 58 mm 40 Nm
47128 1050 kg M14 x 2.00 29 mm 108 mm 40 Nm
46933 1900 kg M16 x 2.00 24 mm 56 mm 80 Nm
46930 1900 kg M16 x 2.00 29 mm 56 mm 80 Nm
47126 1900 kg M16 x 2.00 24 mm 106 mm 80 Nm
47130 1900 kg M16 x 2.00 29 mm 106 mm 80 Nm
46934 1900 kg M18 x 2.50 29 mm 54 mm 90 Nm
47134 1900 kg M18 x 2.50 29 mm 104 mm 90 Nm
46938 2150 kg M20 x 2.50 29 mm 52 mm 135 Nm
46936 2150 kg M20 x 2.50 34 mm 52 mm 135 Nm
47132 2150 kg M20 x 2.50 29 mm 102 mm 135 Nm
47136 2150 kg M20 x 2.50 34 mm 102 mm 135 Nm
49302 2650 kg M22 x 2.50 39 mm 50 mm 311 Nm
49351 2650 kg M22 x 2.50 39 mm 100 mm 311 Nm
49303 2850 kg M24 x 3.00 39 mm 48 mm 311 Nm
49353 2850 kg M24 x 3.00 39 mm 98 mm 311 Nm
46941 3000 kg M20 x 2.50 27 mm 78 mm 135 Nm
46942 3000 kg M20 x 2.50 32 mm 78 mm 135 Nm
47140 3000 kg M20 x 2.50 27 mm 118 mm 135 Nm
47142 3000 kg M20 x 2.50 32 mm 118 mm 135 Nm
46944 3000 kg M22 x 2.50 37 mm 76 mm 135 Nm
47144 3000 kg M22 x 2.50 37 mm 116 mm 135 Nm
46947 4200 kg M24 x 3.00 32 mm 74 mm 311 Nm
46948 4200 kg M24 x 3.00 37 mm 74 mm 311 Nm
47146 4200 kg M24 x 3.00 32 mm 114 mm 311 Nm
47148 4200 kg M24 x 3.00 37 mm 114 mm 311 Nm
46950 4200 kg M30 x 3.50 58 mm 108 mm 637 Nm
49304 5000 kg M33 x 3.50 47 mm 65 mm 637 Nm
49355 5000 kg M33 x 3.50 47 mm 105 mm 637 Nm
49305 5500 kg M36 x 4.00 57 mm 62 mm 1085 Nm
49357 5500 kg M36 x 4.00 57 mm 102 mm 1085 Nm
46956 7000 kg M30 x 3.50 42 mm 106 mm 637 Nm
46955 7000 kg M30 x 3.50 46 mm 106 mm 637 Nm
46958 7000 kg M30 x 3.50 62 mm 106 mm 637 Nm
46957 7000 kg M30 x 3.50 67 mm 106 mm 637 Nm
46960 7000 kg M33 x 3.50 67 mm 103 mm 637 Nm
49306??? 8500 kg M36 x 4.00 56 mm 100 mm 1085 Nm
49307??? 9000 kg M39 x 4.00 56 mm 97 mm 1085 Nm
49308??? 9250 kg M42 x 4.50 66 mm 94 mm 1085 Nm
49309??? 9500 kg M45 x 4.50 66 mm 91 mm 1085 Nm
49310??? 9500 kg M46 x 5.00 66 mm 90 mm 1085 Nm
46961??? 10000 kg M33 x 3.50 58 mm 140 mm 637 Nm
46962??? 10000 kg M33 x 3.50 68 mm 140 mm 637 Nm
49311??? 10000 kg M48 x 5.00 66 mm 88 mm? 1085 Nm
46963 11000 kg M36 x 4.00 58 mm 166 mm 1085 Nm
46966 11000 kg M36 x 4.00 63 mm 166 mm 1085 Nm
46964 11000 kg M36 x 4.00 68 mm 166 mm 1085 Nm
46965 12500 kg M42 x 4.50 68 mm 160 mm 1085 Nm
46968 12500 kg M42 x 4.50 83 mm 160 mm 1085 Nm
46980 13500 kg M48 x 5.00 68 mm 154 mm 1085 Nm
46970 13500 kg M48 x 5.00 83 mm 154 mm 1085 Nm
46979 13500 kg M48 x 5.00 88 mm 154 mm 1085 Nm
46973 13500 kg M56 x 5.50 88 mm 154 mm 1085 Nm
49312 14500 kg M52 x 5.00 88 mm 150 mm 1085 Nm
49313 15500 kg M56 x 5.50 88 mm 146 mm 1085 Nm
49314 16500 kg M64 x 6.00 98 mm 138 mm 2847 Nm
46972 22300 kg M64 x 6.00 101 mm 204 mm 2847 Nm
49315 24500 kg M72 x 6.00 107 mm 196 mm 5830 Nm
49316 26500 kg M80 x 6.00 117 mm 188 mm 5830 Nm
46988 31500 kg M72 x 6.00 132 mm 220 mm 5830 Nm
46989 31500 kg M80 x 6.00 132 mm 200 mm 5830 Nm
49318 33000 kg M100 x 6.00 150 mm 200 mm 6914 Nm
49317 33000 kg M90 x 6.00 140 mm 200 mm 6914 Nm
46994 44600 kg M100 x 6.00 200 mm 235 mm 6914 Nm
46990 44600 kg M90 x 6.00 177 mm 235 mm? 6914 Nm

Each Actek hoist ring is 200% Proof-load Tested and individually serial numbered for better trace-ability. Each hoist ring is individually packaged, shipped with a certificate of conformance, safety precaution, and additional safety information.Swivel Hoist Rings are designed for lifting at any angle because they can swivel 360? and pivot 180?. Therefore, the rated load remains the same, regardless of the angle of force. As a result, you increase safety and peace of mind. Hoist rings are available with a rated load ranging from 800 lbs. to 250,000 lbs. with a 5:1 design safety factor.

Contact Us

TorqHoist Inc 3558 Lee Road
Unit 4 Shaker Heights, Ohio 44120
+ 216-292-5585
mail@torqhoist.com

free!

Hear back in 24 hours, or
Whatsapp
+ 216-292-5585 now.

Consult with us for free

Hear back in 24 hours, or Whatsapp +216-292-5585 now.

    © 2026 torqhoist.com. All Rights Reserved.